Soothe It or Lose It Sunscreen Protection Lotion

By: TOM BRANNA

Editor

Ingredients

%

Phase A

Deionized water
66.73

Dissolvine 220-S (Coast Southwest, Akzo Nobel Functional Chemicals) (Tetrasodium EDTA)
0.20

Propylene glycol (Coast Southwest)
3.00

Allantoin (Coast Southwest, 3V Inc.)
0.05

Stabylen 30 (Coast Southwest, 3V Inc.) (Acrylates/vinyl isodecanoate crosspolymer)
0.25

Phase B

Endimulse EGDS Flake (Coast Southwest) (Glycol distearate)
1.00

Endimulse 165V Flake (Coast Southwest) (Glyceryl stearate (and) PEG-100 stearate)
3.00

Endisil F-350 (Coast Southwest) (Dimethicone)
3.00

Cetyl alcohol (Coast Southwest)
2.00

Endisil FS-677 (Coast Southwest) (Phenyl trimethicone)
5.00

Cinnamon (Coast Southwest, Vivimed Labs USA, Inc.) (Ethylhexyl methoxycinnamate)
7.50

Octyne-B (Coast Southwest, Vivimed Labs USA, Inc.) (Octocrylene)
3.00

Ben-3 (Coast Southwest, Vivimed Labs USA, Inc.) (Benzophenone-3)
3.50

Phase C

TEA 99% (Coast Southwest) (Triethanolamine)
0.37

Phase D

Vitamin E (Coast Southwest) (Tocopherol)
0.50

Sharomix 702 (Coast Southwest/ Sharon-Laboratories) (Dehydroacetic acid (and) benzoic acid (and) phenoxyethanol)
0.90

Procedure

Phase A – In main vessel, add phase A and begin propeller mixing. Dissolve all ingredients until a uniform solution is formed. Heat to at least 70-75° C. Phase B – In a separate vessel, weigh out phase B and begin heating and mixing to 75-80°C. No particulate should be present. When completely dissolved, add phase B to phase A and mix thoroughly at 500-600 rpm. Remove from heat. Phase C – Add phase C to phase AB and mix thoroughly to keep solution miscible. Begin cooling to 40°C. Phase D – When phase ABC is at desired temperature, add phase D and mix until uniform decreasing speed as needed. Transfer at 30°C.